Astronaut Journal Entry - Spacewalking

10 Things: How to Photograph a Meteor Shower

Taking photographs of a meteor shower can be an exercise in patience as meteors streak across the sky quickly and unannounced, but with these tips – and some good fortune – you might be rewarded with a great photo.

These tips are meant for a DSLR or mirrorless camera, but some point-and-shoot cameras with manual controls could be used as well.

1. The Photo Op: Perseids Meteors

The Perseids are dusty remnants of comet 109P/Swift-Tuttle.

Earth passes through the comet’s invisible, multi-billion mile trail of tiny debris each year around August, creating a meteor shower of so-called “shooting stars” as the particles are vaporized in our atmosphere.

Perseid meteors already are streaking across the sky. This year's shower peaks on a moonless summer night -from 4 pm on the 12th until 4 am on the 13th Eastern Daylight Time.

Read more on the Perseids ›

2. Get away from city lights and find a place with dark skies.

In this 30 second exposure, a meteor streaks across the sky in Spruce Knob, West Virginia, during the 2016 Perseids meteor shower. Credit: NASA/Bill Ingalls

Too much light and it will be hard for your eyes to see fainter meteors, plus your image will get flooded with the glow of light. Turning down the brightness of the camera’s LCD screen will help keep your eyes adjusted to the dark. The peak of the 2018 Perseid meteor shower occurs just after the new moon, meaning a thin crescent will set long before the best viewing hours, leaving hopeful sky watchers with a moonlight-free sky!

3. Use a tripod.

In this ten-second exposure, a meteor streaks across the sky above Washington, DC during the 2015 Perseids meteor shower, Credit: NASA/Joel Kowsky

Meteor photography requires long exposures, and even the steadiest of hands can’t hold a camera still enough for a clear shot. Heavier tripods help reduce shaking caused by wind and footsteps, but even a lightweight tripod will do. You can always place sandbags against the feet of the tripod to add weight and stability. If you don’t have a tripod, you might be able to prop your camera on or up against something around you, but be sure to secure your camera.

4. Use a wide-angle lens.

In this 30 second exposure taken with a circular fish-eye lens, a meteor streaks across the sky during the 2016 Perseids meteor shower as a photographer wipes moisture from the camera lens Friday, August 12, 2016 in Spruce Knob, West Virginia. Credit: NASA/Bill Ingalls

A wide-angle lens will capture more of the sky and give you a greater chance of capturing a meteor in your shot, while a zoom lens captures a smaller area of the sky. The odds of a meteor streaking past that small patch are lower.

5. Use a shutter release cable or the camera’s built-in timer.

Long exposures are not just for meteors. In this shot taken at Joshua Tree National Park, a hiker's headlamp leaves a trail of light along a twilight path. Credit: National Park Service / Hannah Schwalbe

A tripod does a great job of reducing most of the shaking your camera experiences, but even the act of pressing the shutter button can blur your extended exposure. Using the self-timer gives you several seconds for any shaking from pressing the shutter button to stop before the shutter is released. A shutter release cable (without a self-timer) eliminates the need to touch the camera at all. And if your camera has wifi capabilities, you might be able to activate the shutter from a mobile device.

6. Manually focus your lens.

In this 30 second exposure, a meteor streaks across the sky during the annual Perseids meteor shower Friday, August 12, 2016 in Spruce Knob, West Virginia. Credit: NASA/Bill Ingalls

At night, autofocus will struggle to find something on which to focus. Setting your focus to infinity will get you close, but chances are you’ll have to take some test images and do some fine tuning. With your camera on a tripod, take a test image lasting a few seconds, then use the camera’s screen to review the image. Zoom in to a star to see how sharp your focus is. If the stars look like fuzzy blobs, make tiny adjustments to the focus and take another test image.

Repeat until you are happy with the result.

If your camera has a zoomable electronic viewfinder or live view option, you might be able to zoom to a star and focus without having to take a test image.

7. Aim your camera.

The Perseids appear to radiate from the constellation Perseus, visible in the northern sky soon after sunset this time of year.

Even though we don’t know when or where a single meteor will appear, we do know the general area from which they’ll originate.

Meteor showers get their name based on the point in the sky from which they appear to radiate. In the case of the Perseids, during their peak, they appear to come from the direction of the constellation Perseus in the northern sky.

8. Calculate your exposure time.

In this 20-second exposure, a meteor lights up the sky over the top of a mountain ridge near Park City, Utah. Even though this image was captured during the annual Perseid meteor shower, this "shooting star" is probably not one of the Perseid meteors, which originate from material left behind by Comet Swift-Tuttle. Instead, it's likely one of the many bits of rock and dust that randomly fall into the atmosphere on any given night. Credit: NASA/Bill Dunford

As Earth rotates, the stars in the sky appear to move, and if your shutter is open long enough, you might capture some of that movement. If you want to avoid apparent star movement, you can follow the 500 Rule. Take 500 and divide it by the length in millimeters of your lens. The resulting number is the length of time in seconds that you can keep your shutter open before seeing star trails. For example, if you’re using a 20 mm lens, 25 seconds (500 divided by 20) is the longest you can set your exposure time before star trails start to show up in your images.

9. Experiment!

In this 30 second exposure photo, hikers find their way to the top of Spruce Knob in West Virginia to view the annual Perseids meteor shower, Friday, August 12, 2016. Credit: NASA/Bill Ingalls

Once you know the maximum exposure time, you can set your shutter priority to that length and let the camera calculate other settings for your first image. Depending on how the image turns out, you can manually adjust aperture (set it to a lower number if the image is too dark) and ISO (set it to a higher number if the image is too dark) to improve your next images. Changing only one setting at a time will give you a better understanding of how those changes affect your image.

10. Enjoy the show.

The crew of the International Space Station captured this Perseid meteor falling to Earth over China in 2011. Credit: NASA

With your camera settings adjusted, capturing that perfect photo is just a matter of time and luck. The highest rate of meteors visible per hour is in the hours after midnight and before dawn. Set up your camera next to a lounge chair or a blanket to witness the wonder of a meteor shower for yourself – and, with any luck, you’ll take home some envy-inducing shots, too!

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.

As astronauts, do you have control over which experiments you conduct aboard the ISS? Which ones have been your personal favorites?

GPS: Coming to a Moon Near You!

The next generation of lunar explorers – the Artemis generation – will establish a sustained presence on the Moon, making revolutionary discoveries, prospecting for resources and proving technologies key to future deep space exploration. To support these ambitions, our navigation engineers are developing an architecture that will provide accurate, robust location services all the way out to lunar orbit.

How? We’re teaming up with the U.S. Air Force to extend the use of GPS in space by developing advanced space receivers capable of tracking weak GPS signals far out in space.

Spacecraft near Earth have long relied on GPS signals for navigation data, just as users on the ground might use their phones to maneuver through a highway system. Below approximately 1,860 miles, spacecraft in low-Earth orbit can rely on GPS for near-instantaneous location data. This is an enormous benefit to these missions, allowing many satellites the autonomy to react and respond to unforeseen events without much hands-on oversight.

Beyond this altitude, navigation becomes more challenging. To reliably calculate their position, spacecraft must use signals from the global navigation satellite system (GNSS), the collection of international GPS-like satellite constellations. The region of space that can be serviced by these satellites is called the Space Service Volume, which extends from 1,860 miles to about 22,000 miles, or geosynchronous orbit.

In this area of service, missions don’t rely on GNSS signals in the same way one would on Earth or in low-Earth orbit. They orbit too high to “see” enough signals from GNSS satellites on their side of the globe, so they must rely on signals from GNSS satellite signals spilling over to the opposite side of the globe.  This is because the Earth blocks the main signals of these satellites, so the spacecraft must “listen” for the fainter signals that extend out from the sides of their antennas, known as “side-lobes.”

Though 22,000 miles is considered the end of the Space Service Volume, that hasn’t stopped our engineers from reaching higher. In fact, our simulations prove that GNSS signals could even be used for reliable navigation in lunar orbit, far outside the Space Service Volume, over 200,000 miles from Earth. We’re even planning to use GNSS signals in the navigation architecture for the Gateway, an outpost in orbit around the Moon that will enable sustained lunar surface exploration.

It’s amazing that the same systems you might use to navigate the highways are putting us on the path forward to the Moon!

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.

How does flying feel?

Questions coming up from….

@monicagellar: Is it open for international students?

@Anonymous: How should high school students get involved?

@Anonymous: Can I apply if my subjects are physics and chemistry in college

@unsuspicious-nobody: Do you have plans to repeat this/do something similar for students in the future?

Why's your suit so colorful?

Meet Our Latest CubeSats

When the next Orbital ATK cargo mission to the International Space Station blasts off from Wallops Flight Facility in Virginia on May 20 at 5:04 a.m. EDT carrying science and supplies, the Cygnus spacecraft will also be carrying a few of our latest CubeSats.

The International Space Station is often used to deploy small satellites, a low-cost way to test technology and science techniques in space.

On board this time, for deployment later this summer, are...

The ‘Rabbit’ in the RainCube

As its name suggests, RainCube will use radar to measure rain and snowfall. CubeSats are measured in increments of 1U (A CubeSat unit, or 1U, is roughly equivalent to a 4-inch box, or 10x10x10 centimeters). The RainCube antenna has to be small enough to be crammed into a 1.5U container; the entire satellite is about as big as a cereal box.

"It's like pulling a rabbit out of a hat," said Nacer Chahat, a specialist in antenna design at our Jet Propulsion Laboratory. "Shrinking the size of the radar is a challenge for us. As space engineers, we usually have lots of volume, so building antennas packed into a small volume isn't something we're trained to do."

That small antenna will deploy in space, like an upside-down umbrella. To maintain its small size, the antenna relies on the high-frequency Ka-band wavelength – good for profiling rain and snow. Ka-band also allows for an exponential increase in sending data over long distances, making it the perfect tool for telecommunications.

Peering Into Clouds

TEMPEST-D will also study weather. Temporal Experiment for Storms and Tropical Systems – Demonstration (TEMPEST-D) has satellite technology with the potential to measure cloud and precipitation processes on a global basis. These measurements help improve understanding of Earth’s water cycle and weather predictions, particularly conditions inside storms.

TEMPEST-D millimeter-wave observations have the ability to penetrate into clouds to where precipitation initiation occurs. By measuring the evolution of clouds from the moment of the onset of precipitation, a future TEMPEST constellation mission could improve weather forecasting and improve our understanding of cloud processes, essential to understanding climate change.

Cutting Through the Noise

CubeRRT, also the size of a cereal box, will space test a small component designed to detect and filter radio frequency interference (RFI). RFI is everywhere, from cellphones, radio and TV transmissions, satellite broadcasts and other sources. You probably recognize it as that annoying static when you can’t seem to get your favorite radio station to come in clearly because another station is nearby on the dial.

The same interference that causes radio static also affects the quality of data that instruments like microwave radiometers collect. As the number of RFI-causing devices increases globally, our satellite instruments – specifically, microwave radiometers that gather data on soil moisture, meteorology, climate and more – will be more challenged in collecting high-quality data.

That’s where CubeSat Radiometer Radio frequency interference Technology (CubeRRT) comes in. The small satellite will be carrying a new technology to detect and filter any RFI the satellite encounters in real-time from space. This will reduce the amount of data that needs to be transmitted back to Earth – increasing the quality of important weather and climate measurements.

Searching the Halo of the Milky Way

Did you know that we’re still looking for half of the normal matter that makes up the universe? Scientists have taken a census of all the stars, galaxies and clusters of galaxies — and we’re coming up short, based on what we know about the early days of the cosmos.

That missing matter might be hiding in tendrils of hot gas between galaxies. Or it might be in the halos of hot gas around individual galaxies like our own Milky Way. But if it’s there, why haven’t we seen it? It could be that it’s so hot that it glows in a spectrum of X-rays we haven’t looked at before.

Image Credit: Blue Canyon Technologies

Enter HaloSat. Led by the University of Iowa, HaloSat will search the halo of the Milky Way for the emissions oxygen gives off at these very high temperatures. Most other X-ray satellites look at narrow patches of the sky and at individual sources. HaloSat will look at large swaths of the sky at a time, which will help us figure out the geometry of the halo — whether it surrounds the galaxy more like a fried egg or a sphere. Knowing the halo’s shape will in turn help us figure out the mass, which may help us discover if the universe’s missing matter is in galactic halos.

CubeSats for All

Small satellites benefit Earth and its people (us!) in multiple ways. From Earth imaging satellites that help meteorologists to predict storm strengths and direction, to satellites that focus on technology demonstrations to help determine what materials function best in a microgravity environment, the science enabled by CubeSats is diverse. 

They are also a pathway to space science for students. Our CubeSat Launch initiative (CSLI) provides access to space for small satellites developed by our Centers and programs, educational institutions and nonprofit organizations. Since the program began, more than 50 educational CubeSats have flown. In 2016, students built the first CubeSat deployed into space by an elementary school.

Learn more about CubeSats HERE. 

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com.  

What are CubeSats?

CubeSats are a class of research spacecraft called nanosatellites. They provide low-cost opportunities for small satellite payloads to fly on rockets planned for upcoming launches. Small satellites, including CubeSats, are playing an increasingly larger role in exploration, technology demonstration, scientific research and educational investigations here at NASA. 

Fourteen miniature satellites were deployed from the International Space Station earlier this week. Two of the CubeSats were Danish and have communication and ship signal tracking capabilities. The remaining are Dove satellites from Planet Labs and will take images of Earth from space.

On Thursday, Oct. 8, thirteen CubeSats are scheduled to launch aboard a United Launch Alliance Atlas V rocket at 8:49 a.m. EDT. Watch live on NASA TV starting at 8:29 a.m. http://www.nasa.gov/nasatv

To learn more about tomorrow’s launch, watch NASA Television today, Oct. 7 at 1 p.m. and 2 p.m. EDT. The briefings will highlight the growing importance of CubeSats in space exploration.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Welcome Home HERA Mission XVII!

With the Human Exploration Research Analog (HERA) habitat, we complete studies to prepare us for exploration to asteroids, Mars, and the Moon… here on Earth! The studies are called analogs, and they simulate space missions to study how different aspects of deep space affect humans. During a HERA mission, the crew (i.e., the research participants) live and work very much as astronauts do, with minimal contact with anyone other than Mission Control for 45 days.

The most recent study, Mission XVII, just “returned to Earth” on June 18. (i.e., the participants egressed, or exited the habitat at our Johnson Space Center in Houston after their 45-day study.) We talked with the crew, Ellie, Will, Chi, and Michael, about the experience. Here are some highlights!

Why did you decide to participate in HERA Mission XVII?

HERA Mission VXII participants (from left to right) Ellie, Will, Chi, and Michael.

“My master’s is in human factors,” said Chi, who studies the interaction between humans and other systems at Embry-Riddle Aeronautical University. “I figured this would be a cool way to study the other side of the table and actually participate in an analog.” For Michael, who holds a PhD in aerospace engineering and researches immunology and radio biology, it was an opportunity to experience life as an astronaut doing science in space. “I’ve flown [experiments] on the space station and shuttle,” he said. “Now I wanted to see the other side.” For Will, a geosciences PhD, it provided an opportunity to contribute to space exploration and neuroscience, which he considers two of the biggest fields with the most potential in science. “Here, we have this project that is the perfect intersection of those two things,” he said. And Ellie, a pilot in the Air Force, learned about HERA while working on her master’s thesis on Earth and space analogs and how to improve them for deep-space studies. “A lot of my interests are similar to Chi’s,” she said. “Human factors and physiological aspects are things that I find very fascinating.”

NASA missions all have patches, and HERA Mission XVII is no different. Did you get to design your patch?

HERA Mission VXII patch, which reads “May the Force be with you” in Latin and features Star Wars iconography. It’s a reference to the mission’s start date, May 4th aka Star Wars Day!

“We did!” They said …with a little the help from Michael’s brother, who is a designer. He drew several different designs based on the crew’s ideas. They picked one and worked together on tweaks. “We knew we were going [inside the habitat] on May Fourth,” Michael said. “We knew it would be Star Wars Day. So we did a Star Wars theme.” The patch had to come together fairly quickly though, since a Star Wars Day “launch” wasn’t the initial plan. “We were supposed to start two weeks earlier,” Ellie said. “It just so happened the new start date was May the Fourth!” Along with the Star Wars imagery, the patch includes a hurricane symbol, to pay tribute to hurricane Harvey which caused a previous crew to end their mission early, and an image of the HERA habitat. Will joked that designing the patch was “our first team task.”

How much free time did you have and what did you do with it?

HERA Mission XVII crew looking down the ladders inside the habitat.

“It was a decent amount,” Michael said. “I could have used more on the harder days, but in a way it’s good we didn’t have more because it’s harder to stay awake when you have nothing to do.” (The mission included a sleep reduction study, which meant the crew only got five hours of sleep a night five days a week.) “With the time I did have, I read a lot,” he said. He also drew, kept a journal, and “wrote bad haikus.” Because of the sleep study, Ellie didn’t read as much. “For me, had I tried to read or sit and do anything not interactive, I would have fallen asleep,” she said.

The crew’s art gallery, where they hung drawing and haikus they wrote.

Journaling and drawing were popular ways to pass the time. “We developed a crew art gallery on one of the walls,” Will said. They also played board games—in particular a game where you score points by making words with lettered tiles on a 15×15 grid. (Yes that one!) “Playing [that game] with two scientists wasn’t always fun though,” Ellie joked, referencing some of the more obscure vocabulary words Will and Michael had at the ready. “I was like, ‘What does that word mean?’ ‘Well that word means lava flow,” she said laughing. (The rest of the crew assured us she fared just fine.)

Chi tried reading, but found it difficult due to the dimmed lights that were part of an onboard light study. She took on a side project instead: 1000 paper cranes. “There is a story in Japan—I’m half Japanese—that if you make a 1000 cranes, it’s supposed to grant you a wish,” she said. She gave hers to her grandmother.

The whole crew having dinner together on “Sophisticated Saturdays!” From left to right: Will, Ellie, Chi, and Michael. They’re wearing their Saturday best, which includes the usual research equipment.

On weekends, the crew got eight hours of sleep, which they celebrated with “Sophisticated Saturdays!” “Coming in, we all brought an outfit that was a little fancy,” Ellie said. (Like a tie, a vest, an athletic dress—that kind of thing.) “We would only put it on Saturday evenings, and we’d have dinner on the first level at the one and only table we could all sit at and face each other,” she said. “We would pretend it was a different fancy restaurant every week.”

The table set for a “civilized” Saturday dinner. Once the crew’s hydroponics grew, they were able to add some greenery to the table.

“It was a way to feel more civilized,” Will said, who then offered another great use of their free time: establishing good habits. “I would use the free time to journal, for example. I’d just keep it up every day. That and stretching. Hydrating. Flossing.”

Like real astronauts, you were in contact with Mission Control and further monitored by HERA personnel. Was it weird being on camera all the time?

HERA personnel and the monitors they use for a typical HERA mission.

“I was always aware of it,” Michael said, “but I don’t think it changed my behavior. It’s not like I forgot about it. It was always there. I just wasn’t willing to live paranoid for 45 days.” Ellie agreed. “It was always in the back of my mind,” she said, further adding that they wore microphones and various other sensors. “We were wired all the time,” she said.

After the study, the crew met up with the people facilitating the experiments, sometimes for the first time. “It was really fun to meet Mission Control afterwards,” Will said. “They had just been this voice coming from the little boxes. It was great getting to meet them and put faces to the voices,” he said. “Of course, they knew us well. Very well.”

For more information on HERA, visit our analogs homepage.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

7 Things That Happen When You Go To Space

Told Through Astronaut Scott Kelly’s Tweets

Astronaut Scott Kelly is currently spending a year in space. Most expeditions to the space station last four to six months. By doubling the length of this mission, researchers hope to better understand how the human body reacts and adapts to long-duration spaceflight. During this one-year mission, Kelly is also participating in the Twins Study. While Kelly is in space, his identical twin brother, retired NASA Astronaut Mark Kelly, will participate in a number of comparative genetic studies.

Here are a few things that happen when astronauts go to the space station:

1. Your personal hygiene takes on a different form:

2. Sleeping arrangements might take some getting used to:

3. Internet services will remind you of the 90s:

4. You never have to do laundry:

5. You get to become immersed in a range of different cultures:

6. All of your water is recycled…yes…that means urine too:

7. You get to see the Earth like never before:

Follow Astronaut Scott Kelly’s Year in Space mission on Facebook, Twitter and Instagram. 

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com